Our Halloween Silhouettes lit up and shot from outside. You can see another close up view of these silhouettes here and here. You can also see our large "Witch on Broom" and "Fading Ghost" silhouettes here.
**See below for updates & a brief "How To".
**Update - Several people have asked me where we purchased these Halloween silhouettes & if the were vinyl. All of our silhouettes were painted on cheap white fabric.
For these silhouettes -
- We cut cheap white fabric into long panels.
- We traced the design onto fabric.
- We painted the silhouettes using "dark gray paint" (Martha Stewart tip). The gray paint will appear black when lit. Make sure you paint the silhouette on the side of the fabric that faces towards the outside. Also, make sure you protect the surface that you are painting on, since the paint can bleed through the fabric.
- We hung the silhouettes in our windows like curtains, using a small/thin peice of dowel at the top. Our windows are vinyl & just happened to have a small pocket at the top that works perfectly for hanging these. To hang, we just slightly flex the thin piece of dowel & feed the ends in these pockets.
- I usually light my silhouettes with either clip on work lights or table lamps. The window silhouettes in this post were lit using table lamps. I placed the lamps on the floor & centered at the base of each silhouette. I removed the lamp shades & replaced the regular bulb with colored spotlight bulbs. You can purchase these bulbs at places like Home Depot. I use two lamps for the witch and caldron silhouette, since these windows are really large & one lamp did not light it well enough.** Be careful that your lamps are not placed too close to curtains & that they do not get tipped over! These spotlight bulbs tend to run pretty hot. I close the bedroom doors when these silhouettes are lit. Even though I use sturdy lamps, I wouldn't want to risk our cats accidentally tipping one over or burning them selves on the open *hot* bulb.
Blessings, Tracy
What make the green or red lights in the background?
ReplyDeleteI usually light my silhouettes with either clip on work lights or table lamps. The window silhouettes in this post were lit using table lamps. I placed the lamps on the floor & centered at the base of each silhouette. I removed the lamp shades & replaced the regular bulb with colored spotlight bulbs. You can purchase these bulbs at places like Home Depot. I use two lamps for the witch and caldron silhouette, since these windows are really large & one lamp did not light it well enough.
ReplyDelete** Be careful that your lamps are not placed too close to curtains & that they do not get tipped over! These spotlight bulbs tend to run pretty hot. I close the bedroom doors when these silhouettes are lit. Even though I use sturdy lamps, I wouldn't want to risk our cats accidentally tipping one over or burning them selves on the open *hot* bulb.
These are very cool and very clever! (I am visiting from storybeader's blog.)
ReplyDelete