Halloween Window Silhouettes

Our Halloween Silhouettes lit up and shot from outside.  You can see another close up view of these silhouettes here and here.   You can also see our large "Witch on Broom" and "Fading Ghost" silhouettes here.

  **See below for updates & a brief "How To".

**Update - Several people have asked me where we purchased these Halloween silhouettes & if the were vinyl.  All of our silhouettes were painted on cheap white fabric.

For these silhouettes - 

1. We cut cheap white fabric into long panels.
2. We traced the design onto fabric.
3. We painted the silhouettes using "dark gray paint" (Martha Stewart tip). The gray paint will appear black when lit.  Make sure you paint the silhouette on the side of the fabric that faces towards the outside. Also, make sure you protect the surface that you are painting on, since the paint can bleed through the fabric.
4. We hung the silhouettes in our windows like curtains, using a small/thin peice of dowel at the top. Our windows are vinyl & just happened to have a small pocket at the top that works perfectly for hanging these.  To hang, we just slightly flex the thin piece of dowel & feed the ends in these pockets.
5. I usually light my silhouettes with either clip on work lights or table lamps. The window silhouettes in this post were lit using table lamps. I placed the lamps on the floor & centered at the base of each silhouette. I removed the lamp shades & replaced the regular bulb with colored spotlight bulbs. You can purchase these bulbs at places like Home Depot. I use two lamps for the witch and caldron silhouette, since these windows are really large & one lamp did not light it well enough. 
   ** Be careful that your lamps are not placed too close to curtains & that they do not get tipped over! These spotlight bulbs tend to run pretty hot. I close the bedroom doors when these silhouettes are lit. Even though I use sturdy lamps, I wouldn't want to risk our cats accidentally tipping one over or burning them selves on the open *hot* bulb.

I get a lot of people on my site looking at our Halloween window silhouettes.  If you would like additional silhouette ideas, I stumbled upon a great DIY site with some awesome Haunted House Silhouette ideas.  Take a minute & go check them out.

Blessings, Tracy

Witch with Caldron Window Silhouette

Here is a close up shot (from the inside) of our witch and caldron window silhouette. I was unable to post this last year due to a camera meltdown.

See this post for a brief "How To" on making these silhouettes.

Blessings, Tracy

Somebody up there doesn't like me!

Today, I sadly started taking down and packing away our Halloween decor.  While taking a little break, I saw my darn broken down camera sitting on the counter....taunting me (I say).  I picked it up, turned it on and found it was "kind of" working again.  It was having brief breakdowns still, but I was able to snap a few pictures.  I am annoyed that I missed so many photos in the last 2 days and now that I have packed away or dismantled about a 1/2 of our Halloween decor, it decides to work again.  Here is a few of the pictures I was able to snap between breakdowns. 

Tall jar of bones. 

You can buy these jars really cheap at Marshalls & TJ Max.

Short jar of skulls

Our Guest Bath

Close up of framed quote in bath. 

This quote is from the Metallica song, Enter Sandman.  Not a Metallica fan, but thought this quote was priceless for Halloween.  It took me 10-15 minutes to put together - Printed out quote, burned edges of the paper and backed with a piece of black construction paper, framed in a Goodwill $1.99 frame.  I would have liked to age the paper, but this was done just before my dinner guest arrived.  Our guests really got a kick out of it.

Guest bath 2

Missing a shot of framed vintage (creepy) photo that I had already packed.  It was sitting next to this folk art skeleton figurine, in our guest bath.

Living room skulls

Living room - skull in a basket

Skull & owl on top of Fridge

Bat silhouette hanging in spare bedroom window (shot from inside).

See this post for a brief "How To" on making these silhouettes.

Man silhouette hanging in guest bedroom (again shot from inside).

Missing our last silhouette.  I already removed and stored our "Witch and Caldron" silhouettes that hang in a double window in our master bedroom.  Maybe I'll get a shot next year.

Bought these 3 vintage ghost figures at an Estate Sale.

Two (of many) lit pumpkins

Owl hanging out on a curtain rod in dining room

Pumpkin figurine.

Vintage looking treat bucket

Halloween Cake Server

Cake server with skull and mouse. 

Skull in fruit dish

Living room table skull

Crow (with pearls) on mantel

Owl on antique mantel clock

Mesh covered pumpkins

Large owl on top of kitchen cupboards

Crow and twig pumpkins on top of kitchen cupboards

Crows, twig pumpkins and flying pig....oh my!

On top of kitchen cabinet.  Fall colored dishes.

I wanted to get some update porch and outdoor decor pictures this year, but sadly we already packed it up late last night.

If I find other things as I pack I will try to snap some additional photos.

Blessings, Tracy

Fading Window Ghost Silhouettes

Here's our simple ghost silhouette idea.

**Update - You can see a short video of our ghost fading in and out in this post.  The video seems temperamental, some times it appears & other times it is MIA.  Try again later if you don't see it.

Sorry, this (blurry) picture is the only I could find of our house with silhouettes.

You can see the ghosts in 3 of our windows.

Close up photo of one of the ghost (& our witch).

Here's a simple how to -

1. For our original ghost silhouettes, we cut heavy duty poster board to the size of 3 of our windows.
2. We came up with a simple ghost design &  decided where on the window we wanted to position our ghost heads. This was important for us, since our window is broken into 4 sections by cross bars. Once the position was decided, we cut the outline of the ghost's head in each piece of poster board. Two of our ghost are facing or leaning one direction & the third the other direction. This adds some interest & keeps them from all looking exactly the same.
3. We then cut cheap white fabric a little larger than each of our cut out ghost heads & glued them securely (if I remember correctly we used a glue gun), making sure the fabric was taut as you glue it down.
4. I then painted the "C" shaped (or reversed "C" shaped) eyes on each ghost face with dark gray paint. This would be painted on the finished side of the silhouettes. Keep in mind if you have crossbars in your window, as we do, and take this into account when deciding on placement of the eyes.  *Tip - I can't remember exactly where (possibly Martha Stewart?), but I'm pretty sure I read that you should always use dark gray paint for silhouettes, since black paint is too dark. As you can see in our pictures, the dark gray appears black anyways.
5. We taped the silhouette into our windows, making sure there was no light seeping around the edges.
6. We used a work light to illuminate each ghost, making sure it was just "aimed" at the silhouette and not directly behind the silhouette. If it is placed behind the silhouette, you will be able to see the light bulb through the fabric & it will distract from your image.
7. To add to the effect, we used a light faders that we purchased in the Halloween section of our local Menards. You plug your light into the fader & then plug the fader into the wall (or timer). These devices will cause the light to gradually fade in and out & has a speed setting so you can adjust the fading slower or faster. We also have everything on a timer so it all lights automatically at a set time.  It really looks cool with each ghost fading in and out at different times.  Our witch is not on a fader, so it stays lit continuously.

Ghost Fade Adapter

About a year ago, we updated ours ghost because the poster board of our originals was fading with age. Since we use them every year, we made them out of wood instead of poster board, so they would be sturdier.

1. We just took two very thin piece of wood and sandwiched them together to cut our shape out.
2. Painted the sides that would be visible with dark gray paint.
3. Stapled the fabric taut on the unpainted side of our cut out silhouette.
4. Glued the unpainted sides of the 2 thin pieces of wood together (sandwiching the fabric between), and painted the eyes on the each ghost. Our new ghost look finished on both the inside and outside.

One of our updated ghost.

Regarding the witch - The sky around the moon & the witch was originally painted on a large piece of fabric & hung in our front window on a long piece of trim (like a curtain), but has since been upgraded to wood also.

The old one shown first & the updated one shown second.  The new one has a handle, that you may have noticed near the top.  We use this handle to hold on to this large (just shy of 5 feet across) silhouette, since we have to climb a ladder to install it. 

Blessings, Tracy